What is PVC ball valve?
21 Mar, 10:02
A 2.5 ball valve is also known as the PVC water inlet valve. The basic function of this valve is to control the water flow from the system. The PVC refers to polyvinyl chloride, which is also referred to as the PVC or the polyvinyl chloride pipe. There are basically two types of this valve like the single stage and the two stage.
The single stage ball valve has an open and close position. When you liked this information as well as you wish to get details with regards to implore you to go to our own site. It can maintain the pressure of the incoming water stream at any given time. Hence, when the valve is closed the water flows out of the pipe at a constant rate. But if the valve is opened then the incoming water will be reduced significantly. The advantage of this valve is that there is no restriction to the amount of water that can flow out.
The 2.5 ball valve on the other hand has a couple of ball bearings in between its two piston rings. When the valve is closed it has a very small opening and the ball bearings allow only a very small amount of water to enter the pipe. If the valve is opened then the water goes inside very fast due to the large opening. So if you want to regulate the flow of the water inside the pipes then you can use this valve. There is also no need of replacing the ball bearings as they are made to last for a long period of time.
With the help of this valve you can find out the exact amount of water that should go in and out of the system. It can save your plants from getting damaged when the water levels are low. This type of valve is used in different industries like the mining, chemical, power, water treatment and many more. Apart from controlling the water flow it also helps to reduce corrosion.
If you are using this type of valve, you will have to maintain it very well. As you increase the pressure and the flow of water into the pipes, the problem of corrosion increases. You should have a maintenance schedule to check this problem and to clean it. You can increase the water pressure of the system by using hydraulic or mechanical means. So, when you install the valve, make sure you install it according to the instructions. So, the valves will work properly if you follow the instructions carefully.
With the passage of time, this type of valves gets affected by rust. So, you should keep it away from moisture to avoid rusting. In order to maintain the valve properly, you should clean it properly at least once in a week. It is one of the best values because it provides excellent control over the water supply to your plants. You should install it in all the pipes in your plant to get water for all the processes.
21 Mar, 11:41