The use of a diagonal and overlapping meeting surface in joining constructional components.
Related Terms |
SKIN CONDENSER
Condenser using the outer surface of the cabinet as the heat radiating medium.
|
ABRASION RESISTANCE
The ability of a material to resist surface wear.
|
CUTTING WEAR
Comes about when hard surface asperities or hard particles that have embedded themselves into a soft surface and plough grooves into the opposing harder surface, e.g., a journal.
|
ADHESIVE WEAR
Often referred to as galling, scuffing, scoring, or seizing. It happens when sliding surfaces contact one another, causing fragments to be pulled from one surface and to adhere to the other.
|
JOURNAL BEARING
A sliding type of bearing having either rotating or oscillatory motion and in conjunction with which a journal operates. In a full or sleeve type journal bearing, the bearing surface is 360° in extent. In a partial bearing, the bearing surface is less than 360° in extent, i.e., 150°, 120°, etc.
|
CORROSION INHIBITOR
Additive for protecting lubricated metal surfaces against chemical attack by water or other contaminants. There are several types of corrosion inhibitors. Polar compounds wet the metal surface preferentially, protecting it with a film of oil. Other compounds may absorb water by incorporating it in a water-in-oil emulsion so that only the oil touches the metal surface. Another type of corrosion inhibitor combines chemically with the metal to present a non- reactive surface.
|
ADSORBENT FILTER
A filter medium primarily intended to hold soluble and insoluble contaminants on its surface by molecular adhesion.
|
ANTI-FOAM AGENT
Additive used to reduce foaming in petroleum products: silicone oil to break up large surface bubbles, and various kinds of polymers that decrease the amount of small bubbles entrained in the oils.
|
GROWLER
A piece of ice smaller than a BERGY BIT or FLOEBERG, often transparent but appearing green or almost black in color. It extends less than 1 meter above the sea surface and its length is less than 20 feet (6 meters). A growler is large enough to be a hazard to shipping but small enough that it may escape visual or radar detection.
|
HARD BEACH
A portion of a beach especially prepared with a hard surface extending into the water, employed for the purpose of loading or unloading directly into landing ships or landing craft
|
