feedback
Enter marine-related query and AI bot will look for best match in our DB.
 

(CBM) a maintenance plan, conducted on a frequent or real-time basis, which is based on the use of Condition Monitoring to determine when part replacement or other corrective action is required. This process involves establishing a baseline and operating parameters, then frequently monitoring the machine and comparing any changes in operating conditions to the baseline. Repairs or replacement of parts are carried out before the machinery fails based upon the use of the tools prescribed for CM.



Related Terms

PMP

Preventative Maintenance Program a program that consists of Planned Maintenance and/or Condition Monitoring plans.

PREVENTATIVE MAINTENANCE PROGRAM

(PMP) A program that consists of Planned Maintenance and/or Condition Monitoring plans.

FROTH FLOTATION

A process for recovery of particles of ore or other material, in which the particles adhere to bubbles and can be removed as part of the froth.

COMPUTER-AIDED MANUFACTURING

The use of computers in converting engineering designs into finished products. Computers assist managers, manufacturing engineers, and production workers by automating many production tasks, such as developing process plans, ordering and tracking materials, and monitoring production schedules, as well as controlling the machines, industrial robots, test equipment, and systems that move and store materials in the factory. Abbreviated CAM.

PASSIVITY

A condition on metal surfaces that inhibits electrochemical action between the metal and its environment, such as with boiler water.

DESIGN STRESS

A permissible maximum stress to which a machine part or structural member may be subjected, which is large enough to prevent failure in case the loads exceed expected values, or other uncertainties turn out unfavorably.

CHANNELING MACHINE

An electrically powered machine that operates by a chipping action of three to five chisels while traveling 97 channeling machine channel iron back and forth on a track; used for primary separation from the rock ledge in marble, limestone, and soft sandstone quarries. Also known as channeler.

FORMING

  1. Application of voltage to an electrolytic capacitor, electrolytic rectifier, or semiconductor device to produce a desired permanent change in electrical characteristics as a part of the manufacturing process. 2. A process for shaping or molding sheets, rods, or other pieces of hot glass, ceramic ware, plastic, or metal by the application of pressure.

BILATERAL TOLERANCE

The amount that the size of a machine part is allowed to vary above or below a basic dimension; for example, 3.650 0.003 centimeters indicates a tolerance of 0.003 centimeter.

RADAR SCANNING

The process or action of directing a radar beam through a search pattern.

Related questions

MarineProHelp 2018 - 2020

First time here? Check out the FAQ!

If you've arrived to new location and wonder how to dress comfortably according to weather, check Comfiesto

×