Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.
Intimate mixture of oil and water, generally of a milky or cloudy appearance. Emulsions may be of two types: oil-in water (where water is the continuous phase) and water-in-oil (where water is the discontinuous phase).

Related Terms

ALKALINE BOIL-OUT

Employed to remove oil and grease deposits from heating surfaces.

BULK CARGO

Cargo such as oil, coal, ore, woodchips, etc. not shipped in bags or containers

OILING SPLASH SYSTEM

Method of lubricating moving parts by agitating or splashing oil in the crankcase.

EMULSIFIER

Additive that promotes the formation of a stable mixture, or emulsion, of oil and water. Common emulsifiers are: metallic soaps, certain animal and vegetable oils, and various polar compounds.

CLOUD POINT

The temperature at which waxy crystals in an oil or fuel form a cloudy appearance.

CORROSION INHIBITOR

Additive for protecting lubricated metal surfaces against chemical attack by water or other contaminants. There are several types of corrosion inhibitors. Polar compounds wet the metal surface preferentially, protecting it with a film of oil. Other compounds may absorb water by incorporating it in a water-in-oil emulsion so that only the oil touches the metal surface. Another type of corrosion inhibitor combines chemically with the metal to present a non- reactive surface.

CORROSION INHIBITOR

Additive for protecting lubricated metal surfaces against chemical attack by water or other contaminants. There are several types of corrosion inhibitors. Polar compounds wet the metal surface preferentially, protecting it with a film of oil. Other compounds may absorb water by incorporating it in a water-in-oil emulsion so that only the oil touches the metal surface. Another type of corrosion inhibitor combines chemically with the metal to present a non- reactive surface.

CARBON RESIDUE

Coked material remaining after an oil has been exposed to high temperatures under controlled conditions.

% CORREL

The percentage of peaks in the used oil infrared spectrum which match those in the reference oil. A sudden decrease in this value usually means that the oil was mixed with a different type.

ANTI-FOAM AGENT

Additive used to reduce foaming in petroleum products: silicone oil to break up large surface bubbles, and various kinds of polymers that decrease the amount of small bubbles entrained in the oils.
Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.

Related questions

MarineProHelp 2018 - 2022