Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.
A mold for plastics which is open when the material is introduced and which shapes the material by heat and by the pressure of closing.

Related Terms

RESTRICTOR

A device for producing a deliberate pressure drop or resistance in a line by reducing the cross-sectional flow area.

SKIN CONDENSER

Condenser using the outer surface of the cabinet as the heat radiating medium.

SAFETY CONTROL

Device to stop unit, equipment or system if unsafe pressure and/or temperatures and/or dangerous conditions are reached.

ABRASION RESISTANCE

The ability of a material to resist surface wear.

CONTAMINANT CAPACITY

The weight of a specified artificial contaminant that must be added to the influent to produce a given differential pressure across a filter at specified conditions. Used as an indication of relative service life. Also known as Dirt capacity, Dust capacity

DIELECTRIC STRENGTH

A measure of the ability of an insulating material to withstand electric stress (voltage) without failure. Fluids with high dielectric strength (usually expressed in volts or kilovolts) are good electrical insulators. (ASTM Designation D 877.)

BUBBLE POINT

The differential gas pressure at which the first steady stream of gas bubbles is emitted from a wetted filter element under specified test conditions.

CLEAN ROOM

A facility or enclosure in which air content and other conditions (such as temperature, humidity, and pressure) are controlled and maintained at a specific level by special facilities and operating processes and by trained personnel.

ABSORPTION

The assimilation of one material into another; in petroleum refining, the use of an absorptive liquid to selectively remove components from a process stream.

REFRIGERATING CAPACITY

The ability of a system to remove heat as compared with the cooling effect produced by melting of ice.
Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.

Related questions

MarineProHelp 2018 - 2022