Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.
The principle that, when a physical system is subject only to internal forces that bodies in the system exert on each other, the total angular momentum of the system remains constant, provided that both spin and orbital angular momentum are taken into account.

Related Terms

SAFETY CONTROL

Device to stop unit, equipment or system if unsafe pressure and/or temperatures and/or dangerous conditions are reached.

AGGLOMERATION

The potential of the system for particle attraction and adhesion.

REMOTE REFRIGERATING SYSTEM

Refrigerating system in which condensing unit is away from space to be cooled.

REFRIGERATING CAPACITY

The ability of a system to remove heat as compared with the cooling effect produced by melting of ice.

ADIABATIC PROCESS

A thermo-dynamic process in which no heat is extracted from or added to the system of the process.

RUNNING TIME

Amount of time an unit, equipment or system is run per hour or per 24 hours.

ACID CONDITION IN SYSTEM

Condition in which refrigerant or oil in a system, is mixed with vapor and fluids that are acidic in nature.

GREENWICH HOUR ANGLE

Angular distance west of the Greenwich celestial meridian; the arc of the celestial equator, or the angle at the celestial pole, between the upper branch of the Greenwich celestial meridian and the hour circle of a point on the celestial sphere, measured westward from the Greenwich celestial meridian throug

GULF STREAM SYSTEM

A system of ocean currents comprised of the Florida Current, the Gulf Stream, and the North Atlantic Current.

HALF-POWER POINTS

Power ratios used to define the angular width of a radar beam. One convention defines beam width as the angular width between points at which the field strength is 71 percent of its maximum value. Expressed in terms of power ratio, this convention defines beam width as the angular width between half-power points. A second convention defines beam width as the angular width between points at which the field strength is 50 percent of its maximum value. Expressed in terms of power ratio, the latter convention defines beam width as the angular width between quarter- power points.
Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.

Related questions

MarineProHelp 2018 - 2022