feedback
Enter marine-related query and AI bot will look for best match in our DB.
 

Methods of solving integer programming problems that employ cut constraints derived from the original problem.



Related Terms

COMBINED FEEDER CUTOFF

A device that regulates makeup water to a boiler in combination with a low water fuel cut off.

DIFFERENTIAL

(of a control) the difference between cut in and cut out points.

TRAIL FOR MAIN FLAME IGNITION

A timed interval when with the ignition means proved, the main valve is permitted to remain open. If the main burner is not ignited during this period, the main valve and ignition means are cut off. A safety switch lockout follows.

TRAIL FOR PILOT IGNITION

A timed interval when the pilot valve is held open and an attempt made to ignite and prove it. If the presence of the pilot is proved at the termination of the interval, the main valve is energized; if not the pilot and ignition are cut off followed by a safety lockout.

TANGENT

A line that touches but does not cut the circumference of a circle.

RABBET

A groove cut in wood to form part of a joint.

JOGGLE

A slender triangular recess cut into the faying surface of a frame or steamed timber to fit over the land of clinker planking, or cut into the faying edge of a plank or rebate to avoid feather ends on a strake of planking. The feather end is cut off to produce a nib. The joggle and nib in this case is made wide enough to allow a caulking iron to enter the seam.

RAZEE

  1. A sailing ship that has been cut down to reduce the number of decks.
  2. To cut down a sailing ship to reduce the number of decks.

ROACH

The curved cut in edge of sail for preventing chafing.

CHAMFER

To cut off the sharp edge of a 90 degree corner

Related questions

MarineProHelp 2018 - 2020

First time here? Check out the FAQ!

If you've arrived to new location and wonder how to dress comfortably according to weather, check Comfiesto

×