feedback
Enter marine-related query and AI bot will look for best match in our DB.
 

A knife used in die-cutting processes, designed to cut just partway into the paper or board so that it can be folded.



Related Terms

PANEL BOARD

A drawing board with an adjustable outer frame that is forced over the drawing paper to hold and strain it.

CASTELLATED NUT

A type of hexagonal nut with a cylindrical portion above through which slots are cut so that a cotter pin or safety wire can hold it in place.

DEINKING

The process of removing ink from recycled paper so that the fibers can be used again.

ANGLE BOARD

A board whose surface is cut at a desired angle; serves as a guide for cutting or planing other boards at the same angle.

PAPERCUTTER

[DESENG] Ahand-operateddevice to cut and trim paper, consisting of a cutting blade bolted at one end to a ruled board; when the blade is drawn flush with the board, which has a metal strip at the cutting edge, a shearing action takes place which cuts the paper cleanly and evenly.

CLIP BOND

A bond in which the inner edge of face brick is cut off so that bricks laid diagonal to a wall can be joined to those laid parallel to it.

DUMMY JOINT

A groove cut into the top half of a concrete slab, sometimes packed with filler, to form a line where the slab can crack with only minimum damage.

PENETRATION SPEED

The speed at which a drill can cut through rock or other material. penetration test

ELECTROGRAPH

Any plot, graph, or tracing produced by the action of an electric current on prepared sensitized paper (or other chart material) or by means of an electrically controlled stylus or pen.

HOLONOMIC SYSTEM

A system in which the constraints are such that the original coordinates can be expressed in terms of independent coordinates and possibly also the time.

Related questions

MarineProHelp 2018 - 2020

First time here? Check out the FAQ!

If you've arrived to new location and wonder how to dress comfortably according to weather, check Comfiesto

×