A small channel or opening in a filter medium which allows passage of fluid.


Related Terms

PNEUMATIC CONTROL VALVE

A valve in which the force of compressed air against a diaphragm is opposed by the force of a spring to control the area of the opening for a fluid stream.

PLUG METER

A variable-area flowmeter in which a tapered plug, located in an orifice and raised until the resulting opening is sufficient to handle the fluid flow, is used to measure the flow rate.

PEEPDOOR

A small door in a furnace with a glass opening through which combustion may be observed.

PARABOMB

An equipment container with a parachute which is capable of opening automatically after a delayed drop.

MOUSETRAP

A cylindrical fishing tool having the open bottom end fitted with an inward opening valve.

LOUVER

1. An opening in a wall or ceiling with slanted or sloping slats to allow sunlight and ventilation and exclude rain; may be fixed or adjustable, and may be at the opening of a ventilating duct. Also known as outlet ventilator. 2. Any arrangement of fixed or adjustable slatlike openings to provide ventilation.

LOSS-IN-WEIGHT FEEDER

A device to apportion the output of granulated or powdered solids at a constant rate from a feed hopper; weight-measured decrease in hopper content actuates further opening of the discharge chute to compensate for flow loss as the hopper overburden decreases; used in the chemical, fertilizer, and plastics industries.

LIQUID SEAL

1. The depth of liquid above an opening from which gas or vapor issues, as for a riser in a distillation-column tray. 2. Product drawoff in which a depth of liquid prevents the outflow of gas or vapor.

LIGHTENING HOLE

An opening cut into a strengthening member that decreases its weight without significantly altering its strength.

KING CLOSER

In masonry work, a rectangular brick having one corner cut diagonally to half the end of the brick and used to fill an opening in a course larger than half a brick. Also known as beveled closer.

Related questions

MarineProHelp 2018 - 2020