Boiler is filled completely with water or maintained at normal operating level with a positive nitrogen pressure of 35 to 70 kPa.
Related Terms |
RESTRICTOR
A device for producing a deliberate pressure drop or resistance in a line by reducing the cross-sectional flow area.
|
ABMA
American Boiler Manufacturers Association.
|
SAFETY CONTROL
Device to stop unit, equipment or system if unsafe pressure and/or temperatures and/or dangerous conditions are reached.
|
CONTAMINANT CAPACITY
The weight of a specified artificial contaminant that must be added to the influent to produce a given differential pressure across a filter at specified conditions. Used as an indication of relative service life. Also known as Dirt capacity, Dust capacity
|
BUBBLE POINT
The differential gas pressure at which the first steady stream of gas bubbles is emitted from a wetted filter element under specified test conditions.
|
CLEAN ROOM
A facility or enclosure in which air content and other conditions (such as temperature, humidity, and pressure) are controlled and maintained at a specific level by special facilities and operating processes and by trained personnel.
|
RETURN-STEAM CONDENSATE
That steam produced by a boiler which returns to the boiler after it has condensed.
|
ASME SECTION VII SUBSECTION C6
Operation of boiler auxiliaries.
|
CORROSION INHIBITOR
Additive for protecting lubricated metal surfaces against chemical attack by water or other contaminants. There are several types of corrosion inhibitors. Polar compounds wet the metal surface preferentially, protecting it with a film of oil. Other compounds may absorb water by incorporating it in a water-in-oil emulsion so that only the oil touches the metal surface. Another type of corrosion inhibitor combines chemically with the metal to present a non- reactive surface.
|
CRACKING
The process whereby large molecules are broken down by the application of heat and pressure to form smaller molecules.
|
