|
At right angles to the centerline of the boat.
|
|
At right angles to the centerline of the boat.
|
Related Terms |
ATHWARTSHIP
Across the ship, at right angles to the fore-and-aft centerline
|
STATIC SUCTION LIFT
The distance between the pump centerline and the source of liquid below the pump centerline.
|
SUCTION LIFT
The combination of static suction lift and friction head in the suction piping when the source of liquid is below the pump centerline.
|
CENTERBOARD
A board or plate lowered through the hull of a dinghy on the centerline to resist leeway.
|
ATHWART
At right angles to the fore and aft or centerline of a ship.
|
KING PLANK
The centerline plank of a laid deck. Its sides are often recessed, or nibbed, to take the ends of their parallel curved deck planks.
|
CONTROLLING DEPTH
1. The least depth in the approach or channel to an area, such as a port or anchorage, governing the maximum draft of vessels that can enter. 2. The least depth within the limits of a channel; it restricts the safe use of the channel to drafts of less than that depth. The centerline controlling depth of a channel applies only to the channel centerline; lesser depths may exist in the remainder of the channel. The mid-channel controlling depth of a channel is the controlling depth of only the middle half of the channel.
|
LIST
When the centerline plane of a ship is not vertical, the ship is said to list, or to heel
|
AFTER PERPENDICULARS
A vertical line at the intersection of the summer load line and the after side of the rudder post or sternpost, or the centerline of the rudder stock if there is no rudder post or sternpost
|
BASELINE
A fore-and-aft reference line at the upper surface of the flat plate keel at the centerline for flush shell plated vessels. Vertical dimensions are measured from a horizontal plane through the baseline, often called the molded baseline.
|
MarineProHelp 2018 - 2021
