(of a control) the difference between cut in and cut out points.
Related Terms |
ADJUSTABLE DIFFERENTIAL
A means of changing the difference between the control cut-in and cut-out points.
|
ADJUSTABLE DIFFERENTIAL
A means of changing the difference between the control cut-in and cut-out points.
|
ACTION
Refers to the action of a controller. It defines what is done to regulate the final control element to effect control.
|
SHED MODE
A method of demand control that reduces kW demand through shedding and restoring loads.
|
HIGH WATER INEQUALITY
The difference between the heights of the two high waters during a tidal day
|
GRID MAGNETIC ANGLE
Angular difference in direction between grid north and magnetic north. It is measured east or west from grid north. Grid magnetic angle is sometimes called GRID VARIATION or GRIVATION.
|
GULLY
1. A small ravine, especially one cut by running water, but through which water flows only after a rain. 2. On the sea floor, a small valley-like feature
|
HELIOCENTRIC PARALLAX
The difference in the apparent direction or positions of a celestial body outside the solar system, as observed from the earth and sun. Also called STELLAR PARALLAX, ANNUAL PARALLAX
|
DIFFERENTIAL PRESSURE INDICATOR
An indicator which signals the difference in pressure between any two points of a system or a component.
|
SHEAR RATE
The difference between the velocities along the parallel faces of a fluid element divided by the distance between the faces.
|
