Become a Patron and get help from Pros
The lower of the two high waters of any tidal day.

Related Terms


The effect that due to the depth of water, the speed of the vessel and shape of the vessel's hull causes the vessel to sink deeper in the water especially in shallow water and at high speed. The vessel becomes sluggish in responding to the rudder.


A noncatalytic, petroleum-refinery process charging C3 and C4 gases with naphtha or gas oil at high temperature to produce high-quality gasoline and fuel oil; mostly replaced by catalytic reforming; the prodTesting and Materials analysis of paraffins (P), olefins (O), naphthenes (N), and aromatics (A) in gasolines.


The basis of the International Practical Temperature Scale of 1968 from 259.35 to 630.74 C; used in industrial thermometers in the range 0 to 650 C; capable of high accuracy because platinum is noncorrosive, ductile, and nonvolatile, and can which the loads are placed.


A torch in which temperatures as high as 50,000 C are achieved by injecting a plasma gas tangentially into an electric arc formed between electrodes in a chamber; the resulting vortex of hot gases emerges at very high speed through a hole in the negative electrode, to form a jet for welding, spraying of molten metal, and cutting of hard rock or hard metals.


A method of ion implantation in which the workpiece is placed in a plasma containing the appropriate ion species and is repetitively pulse-biased to a high negative potential so that positive plasma ions are accelerated to the surface and implant in the bulk material. Abbreviated PSII.


Any of several types of cutting processes in which metal is removed with or without a flux by a chemical reaction of the base metal with oxygen at high temperatures.


An industrial preparation of nitric acid by the oxidation of ammonia; the oxidation takes place in successive stages to nitric oxide, nitrogen dioxide, and nitric acid; a catalyst of platinum gauze is used and high temperatures are needed.


A flat ring made from synthetic rubber, used as an airtight seal or a seal against high pressures.


The cleaning, servicing, preservation, lubrication, inspection, and adjustment of equipment; it includes that minor replacement of parts not requiring high technical skill, internal alignment, or special locative training.


Hydrostatic lubrication of a journal bearing by using oil at high pressure in the area between the bottom of the journal and the bearing itself so that the shaft is raised and supported by an oil film whether it is rotating or not.

Related questions

MarineProHelp 2018 - 2021