The heat available per square foot of heat-absorbing surface in the furnace. That surface is the projected area of tubes and extended metallic surfaces on the furnace side including walls, floors, roof, partition walls, and platens and the area of the plane of the furnace exit which is defined as the entrance to the convection tube bank.


Related Terms

FLASH POINT

The lowest temperature at which a liquid gives off sufficient vapor to form a flammable mixture with air near the surface of the liquid. The flashpoint temperature is determined by laboratory testing in a prescribed apparatus.

Establishes the danger point when transferring, pumping, and firing procedures are concerned.

POLISHING

1. In petroleum refining, removal of final traces of impurities, as for a lubricant, by clay adsorption or mild hydrogen treating. Smoothing and brightening a surface such as a metal or a rock through the use of abrasive materials.

POISON

A material which reduces the emission of electrons from the surface of a cathode.

POINT CONTACT

A contact between a specially prepared semiconductor surface and a metal point, usually maintained by mechanical periphery.

POINCARE SURFACE OF SECTION

A method of displaying the character of a particular trajectory without examining its complete time development, in which the trajectory is sampled periodically, and the rate of change of a quantity under study is plotted against the value of that quantity at the beginning of each period. Also known as surface of section.

POINT-CONTACT DIODE

A semiconductor rectifier that uses the barrier formed between a specially prepared semiconductor surface and a metal point to produce the rectifying action.

PLATEN

1.A flat plate against which something rests or is pressed. 2. The rubber-covered roller of a typewriter against which paper is pressed when struck by the typebars. 2. A flat surface for exchanging heat in a boiler or heat exchanger which may have extended heat transfer surfaces.

PLANISHING

Smoothing the surface of a metal by a rapid series of overlapping, light hammerlike blows or by rolling in a planishing mill.

PLASTER SHOOTING

A surface blasting method used when no rock drill is necessary or one is not available; consists of placing a charge of gelignite, primed with safety fuse and detonator, in close contact with the rock or boulder and covering it completely with stiff damp clay.

PLASMA-SOURCE ION IMPLANTATION

A method of ion implantation in which the workpiece is placed in a plasma containing the appropriate ion species and is repetitively pulse-biased to a high negative potential so that positive plasma ions are accelerated to the surface and implant in the bulk material. Abbreviated PSII.

Related questions

MarineProHelp 2018 - 2020