Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.
The partial oxidation of the combustible constituents of a fuel.

Related Terms

ANTISTATIC ADDITIVE

An additive that increases the conductivity of a hydrocarbon fuel to hasten the dissipation of electrostatic charges during high-speed dispensing, thereby reducing the fire/ explosion hazard.

CROWN

The top of the piston in an internal combustion engine above the fire ring, exposed to direct flame impingement.

CAM

Eccentric shaft used in most internal combustion engines to open and close valves.

CLOUD POINT

The temperature at which waxy crystals in an oil or fuel form a cloudy appearance.

CAPACITY PLAN

A plan outlining the spaces available for fuel, cargo, ballast, fresh water, etc, with guides on weight and volume for spaces at various drafts and displacements

ALKALI

Any substance having basic (as opposed to acidic) properties. In a restricted sense it is applied to the hydroxides of ammonium, lithium, potassium and sodium. Alkaline materials in lubricating oils neutralize acids to prevent acidic and corrosive wear in internal combustion engines.

FIRE POINT

The temperature to which a combustible liquid must be heated so that the released vapor will burn continuously when ignited under specified conditions (Clevelend Open Cup).

GASOHOL

A blend of 10% anhydrous ethanol (ethyl alcohol) and 90% gasoline, by volume. Used as a motor fuel.

BLOW-BY

Passage of unburned fuel and combustion gases past the piston rings of internal combustion engines, resulting in fuel dilution and contamination of the crankcase oil.

BLOW-BY

Passage of unburned fuel and combustion gases past the piston rings of internal combustion engines, resulting in fuel dilution and contamination of the crankcase oil.
Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.

Related questions

MarineProHelp 2018 - 2022