Difference in time or height of a high or low water at a subordinate station and at a reference station for which predictions are given in the Tide Tables. The difference, when applied accord- ing to sign to the prediction at the reference station, gives the corresponding time or height for the subordinate station.
Related Terms |
DIELECTRIC STRENGTH
A measure of the ability of an insulating material to withstand electric stress (voltage) without failure. Fluids with high dielectric strength (usually expressed in volts or kilovolts) are good electrical insulators. (ASTM Designation D 877.)
|
CORROSION INHIBITOR
Additive for protecting lubricated metal surfaces against chemical attack by water or other contaminants. There are several types of corrosion inhibitors. Polar compounds wet the metal surface preferentially, protecting it with a film of oil. Other compounds may absorb water by incorporating it in a water-in-oil emulsion so that only the oil touches the metal surface. Another type of corrosion inhibitor combines chemically with the metal to present a non- reactive surface.
|
CARBON RESIDUE
Coked material remaining after an oil has been exposed to high temperatures under controlled conditions.
|
REFRIGERATOR
A device to transfer heat from a low temperature to a high temperature medium.
|
ACCELERATION
The time rate of change of velocity; i.e., the derivative of velocity; with respect to time.
|
RUNNING TIME
Amount of time an unit, equipment or system is run per hour or per 24 hours.
|
ADSORPTION
Adhesion of the molecules of gases, liquids, or dissolved substances to a solid surface, resulting in relatively high concentration of the molecules at the place of contact; e.g. the plating out of an anti-wear additive on metal surfaces.
|
DEMULSIBILITY
The ability of a fluid that is insoluble in water to separate from water with which it may be mixed in the form of an emulsion.
|
GROUP REPETITION INTERVAL
The specified time interval of a Loran C chain for all stations of the chain to transmit their pulse groups. For each chain a minimum group repetition interval (GRI) is selected of sufficient duration to provide time for each station to transmit its pulse group and additional time between each pulse group so that signals from two or more stations cannot overlap in time anywhere within the coverage area. The GRI is normally stated in terms of tens of microseconds; i.e., the GRI having a duration of 79,900 microseconds is stated as 7900.
|
HALF-TIDE BASIN
A lock of very large size and usually of irregular shape, the gates of which are kept open for several hours after high tide so that vessels may enter as long as there is sufficient depth over the sill. Vessels remain in the half-tide basin until the ensuing flood tide before they may pass through the gate to the inner harbor. If entry to the inner harbor is required before this time, water must be admitted to the half-tide basin from some external source.
|
