Gas and solid products discharged from the stack.
Related Terms |
BUBBLE POINT
The differential gas pressure at which the first steady stream of gas bubbles is emitted from a wetted filter element under specified test conditions.
|
ARC
A flash, caused by an electric current ionizing a gas or vapor.
|
AGGLOMERATE
The clustering together of a few or many particles into a larger solid mass.
|
ADHESION
The property of a lubricant that causes it to cling or adhere to a solid surface.
|
ADSORPTION
Adhesion of the molecules of gases, liquids, or dissolved substances to a solid surface, resulting in relatively high concentration of the molecules at the place of contact; e.g. the plating out of an anti-wear additive on metal surfaces.
|
ADIABATIC COMPRESSION
Compressing a gas without removing or adding heat.
|
FABRICATION INTEGRITY POINT
The differential gas pressure at which the first stream of gas bubbles are emitted from a wetted filter element under standard test conditions.
|
FLUID
A substance readily assuming the shape of the container in which it is placed; e.g. oil, gas, water or mixtures of these. A general classification including liquids and gases.
|
CAPILLARITY
A property of a solid-liquid system manifested by the tendency of the liquid in contact with the solid to rise above or fall below the level of the surrounding liquid; this phenomenon is seen in a small bore (capillary) tube.
|
BACK WORK RATIO
Is the fraction of the gas turbine work used to drive the compressor.
|
