Removal of water, foam, etc. from the surface at the water level in a boiler. The equipment for such removal.
Related Terms |
SKIN CONDENSER
Condenser using the outer surface of the cabinet as the heat radiating medium.
|
ABMA
American Boiler Manufacturers Association.
|
ABRASION RESISTANCE
The ability of a material to resist surface wear.
|
CUTTING WEAR
Comes about when hard surface asperities or hard particles that have embedded themselves into a soft surface and plough grooves into the opposing harder surface, e.g., a journal.
|
ADHESIVE WEAR
Often referred to as galling, scuffing, scoring, or seizing. It happens when sliding surfaces contact one another, causing fragments to be pulled from one surface and to adhere to the other.
|
JOURNAL BEARING
A sliding type of bearing having either rotating or oscillatory motion and in conjunction with which a journal operates. In a full or sleeve type journal bearing, the bearing surface is 360° in extent. In a partial bearing, the bearing surface is less than 360° in extent, i.e., 150°, 120°, etc.
|
RETURN-STEAM CONDENSATE
That steam produced by a boiler which returns to the boiler after it has condensed.
|
ASME SECTION VII SUBSECTION C6
Operation of boiler auxiliaries.
|
CORROSION INHIBITOR
Additive for protecting lubricated metal surfaces against chemical attack by water or other contaminants. There are several types of corrosion inhibitors. Polar compounds wet the metal surface preferentially, protecting it with a film of oil. Other compounds may absorb water by incorporating it in a water-in-oil emulsion so that only the oil touches the metal surface. Another type of corrosion inhibitor combines chemically with the metal to present a non- reactive surface.
|
CORROSION INHIBITOR
Additive for protecting lubricated metal surfaces against chemical attack by water or other contaminants. There are several types of corrosion inhibitors. Polar compounds wet the metal surface preferentially, protecting it with a film of oil. Other compounds may absorb water by incorporating it in a water-in-oil emulsion so that only the oil touches the metal surface. Another type of corrosion inhibitor combines chemically with the metal to present a non- reactive surface.
|
