Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.
This law concerns matter related to the distribution and exercise of power by public authorities and the legal relation between the state(and its government) and the individuals and is aimed at the protection of public and common interest.

Related Terms

ASME SECTION I

Power Boilers.

HALF-POWER POINTS

Power ratios used to define the angular width of a radar beam. One convention defines beam width as the angular width between points at which the field strength is 71 percent of its maximum value. Expressed in terms of power ratio, this convention defines beam width as the angular width between half-power points. A second convention defines beam width as the angular width between points at which the field strength is 50 percent of its maximum value. Expressed in terms of power ratio, the latter convention defines beam width as the angular width between quarter- power points.

INTENSIFIER

A device which converts low pressure fluid power into higher pressure fluid power.

ANSI-B.31.1

ASME SECTION XI

Rules for in-service inspection of Nuclear Power Plant components.

ASME SECTION III

Nuclear Power Plant Components.

HABITAT SANCTUARY

A marine sanctuary established for the preservation, protection and management of essential or specialized habitats representative of important marine systems.

HOLDING GROUND

The bottom ground of an anchorage. The expression is usually used with a modifying adjective to indicate the quality of the holding power of the material constituting the bottom

VAPOR PRESSURE-REID (RVP)

Measure of the pressure of vapor accumulated above a sample of gasoline or other volatile fuel in a standard bomb at 100°F (37.8°C). Used to predict the vapor locking tendencies of the fuel in a vehicle's fuel system. Controlled by law in some areas to limit air pollution from hydrocarbon evaporation while dispensing.

VISCOSITY INDEX IMPROVER

Additive that increase the viscosity of the fluid throughout its useful temperature range. Such additives are polymers that possess thickening power as a result of their high molecular weight and are necessary for formulation of multi-grade engine oils.
Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.

Related questions

MarineProHelp 2018 - 2022