A hollow cylinder for conveying fluids.
Related Terms |
HEELING MAGNET
A permanent magnet placed vertically in a tube under the center of a marine magnetic compass, to correct for heeling error.
|
DISTILLATION METHOD
A method involving distilling the fluid sample in the presence of a solvent that is miscible in the sample but immiscible in water. The water distilled from the fluid is condensed and segregated in a specially-designed receiving tube or tray graduated to directly indicate the volume of water distilled. (ASTM D-95)
|
CAPILLARITY
A property of a solid-liquid system manifested by the tendency of the liquid in contact with the solid to rise above or fall below the level of the surrounding liquid; this phenomenon is seen in a small bore (capillary) tube.
|
ASME PART PFT SECTION I
Requirements for fire tube boilers.
|
BORE POLISHING
Excessive smoothing of the surface finish of the cylinder bore or cylinder liner in an engine to a mirror-like appearance, resulting in depreciation of ring sealing and oil consumption performance.
|
SHELL TYPE CONDENSER
Cylinder or receiver which contains condensing water coils or tubes.
|
KINEMATIC VISCOSITY
The time required for a fixed amount of an oil to flow through a capillary tube under the force of gravity. The unit of kinematic viscosity is the stoke or centistoke (1/100 of a stoke). Kinematic viscosity may be defined as the quotient of the absolute viscosity in centipoises divided by the specific gravity of a fluid, both at the same temperature Centipoises / Specific Gravity = Centistokes .
|
CONSTRICTOR
Tube or orifice used to restrict flow of a gas or a liquid.
|
CYLINDER HEAD
Plate or cap which encloses compression end of compressor cylinder or combustion chamber of engine.
|
CRT
Cathode ray tube terminal.
|