The driver and driven machines (e.g. Motor and compressor) are positively connected in line to operate at the same speed.
Related Terms |
RESTRICTOR
A device for producing a deliberate pressure drop or resistance in a line by reducing the cross-sectional flow area.
|
ACCESSIBLE HERMETIC
An assembly of motor and compressor, inside a single bolted housing unit.
|
ATF
Fluid for automatic, hydraulic transmissions in motor vehicles.
|
AIR GAP
The space between magnetic poles, or between the rotating and stationary assemblies in a motor or generator.
|
GRID RHUMB LINE
A line making the same oblique angle with all grid meridians. Grid parallels and meridians may be considered special cases of the grid rhumb line.
|
HAND LEAD
A light sounding lead (7 to 14 pounds), usually having a line of not more than 25 fathoms
|
GROUND LOG
A device for determining the course and speed over the ground in shallow water consisting of a lead or weight attached to a line. The lead is thrown overboard and allowed to rest on the bottom. The course over ground is indicated by the direction the line tends and the speed by the amount of line paid out in a unit of time.
|
CASE DRAIN FILTER
A filter located in a line conducting fluid from a pump or motor housing to reservoir.
|
CASE DRAIN FILTER
A filter located in a line conducting fluid from a pump or motor housing to reservoir.
|
GASOHOL
A blend of 10% anhydrous ethanol (ethyl alcohol) and 90% gasoline, by volume. Used as a motor fuel.
|
