A safety device that is made up of an alloy material that is designed to melt at a specific temperature to relieve pressure in a vessel.
Related Terms |
RESTRICTOR
A device for producing a deliberate pressure drop or resistance in a line by reducing the cross-sectional flow area.
|
RESTRICTOR
A device for producing a deliberate pressure drop or resistance in a line by reducing the cross-sectional flow area.
|
SAFETY CONTROL
Device to stop unit, equipment or system if unsafe pressure and/or temperatures and/or dangerous conditions are reached.
|
SAFETY CONTROL
Device to stop unit, equipment or system if unsafe pressure and/or temperatures and/or dangerous conditions are reached.
|
AIR COOLER
A factory-encased assembly of elements whereby the temperature of air passing through the device is reduced.
|
ABRASION RESISTANCE
The ability of a material to resist surface wear.
|
CONTAMINANT CAPACITY
The weight of a specified artificial contaminant that must be added to the influent to produce a given differential pressure across a filter at specified conditions. Used as an indication of relative service life. Also known as Dirt capacity, Dust capacity
|
DIELECTRIC STRENGTH
A measure of the ability of an insulating material to withstand electric stress (voltage) without failure. Fluids with high dielectric strength (usually expressed in volts or kilovolts) are good electrical insulators. (ASTM Designation D 877.)
|
BUBBLE POINT
The differential gas pressure at which the first steady stream of gas bubbles is emitted from a wetted filter element under specified test conditions.
|
FILTER ELEMENT
The porous device that performs the actual process of filtration. Also known as Cartridge
|
