Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.

A solid bearing with no cap.

Related Terms

TRAILBOARD

A decorative board at the bow of a vessel, sometimes bearing the vessel's name.

BALL BEARING

An anti-friction rolling type bearing containing rolling elements in the form of balls.

JOURNAL BEARING

A sliding type of bearing having either rotating or oscillatory motion and in conjunction with which a journal operates. In a full or sleeve type journal bearing, the bearing surface is 360° in extent. In a partial bearing, the bearing surface is less than 360° in extent, i.e., 150°, 120°, etc.

BEARING

A support or guide by means of which a moving part such as a shaft or axle is positioned with respect to the other parts of a mechanism.

AGGLOMERATE

The clustering together of a few or many particles into a larger solid mass.

ADHESION

The property of a lubricant that causes it to cling or adhere to a solid surface.

ADSORPTION

Adhesion of the molecules of gases, liquids, or dissolved substances to a solid surface, resulting in relatively high concentration of the molecules at the place of contact; e.g. the plating out of an anti-wear additive on metal surfaces.

False brinelling

False brinelling of needle roller bearings is actually a fretting corrosion of the surface since the rollers are the I.D. of the bearing. Although its appearance is similar to that of brinelling, false brinelling is characterized by attrition of the steel, and the load on the bearing is less than that required to produce the resulting impression. It is the result of a combination of mechanical and chemical action that is not completely understood, and occurs when a small relative motion or vibration is accompanied by some loading, in the presence of oxygen.

AXIAL-LOAD BEARING

A bearing in which the load acts in the direction of the axis of rotation.

BRIGHT STOCK

A heavy residual lubricant stock with low pour point, used in finished blends to provide good bearing film strength, prevent scuffing, and reduce oil consumption. Usually identified by its viscosity, SUS at 210°F or cSt at 100°C.
Get help from Pros. Remove ads. Promote your CV or LinkedIn profile.

Related questions

MarineProHelp 2018 - 2022