Become a Patron and get help from Pros
Aqueous Film Forming Foam

Related Terms


A change inthe capacitance of a bulk semiconductor or semi-conductor surface film upon exposure to light.photoelectric detector See photodetector.


A device for projecting positive transparent pictures from glass or film onto a reflecting screen; it consists of a concentrated source of light, a condenser system, a holder (or changer) for the slide, a projection lens, and (usually) a blower for cooling the slide. Also known as slide projector.


A record of a specific task made with motion picture film or video tape in which each component of the activity is recorded in an individual frame.


1. A transistor in which the emitter and collector electrodes are formed by etching depressions, then electroplating and alloying a thin film of the impurity metal to the semiconductor wafer, somewhat as in a an electrode with a microscopic tip dimension that may be placed adjacent to or inside a cell for the purpose of recording the electric potentials of single cells, passing electrical currents, or injecting electrically charged substances into the cell. 2. In physical chemistry, a minute electrode used to perform electrolysis of small quantities of material.


A welding process in which two layers of thermoplastic film are heated and fused to form a welded seam by clamping them together in close contact with a shielded electric heating element.


Additive for protecting lubricated metal surfaces against chemical attack by water or other contaminants. There are several types of corrosion inhibitors. Polar compounds wet the metal surface preferentially, protecting it with a film of oil. Other compounds may absorb water by incorporating it in a water-in-oil emulsion so that only the oil touches the metal surface. Another type of corrosion inhibitor combines chemically with the metal to present a non- reactive surface.


A heavy residual lubricant stock with low pour point, used in finished blends to provide good bearing film strength, prevent scuffing, and reduce oil consumption. Usually identified by its viscosity, SUS at 210°F or cSt at 100°C.


microscopic projections on metal surfaces resulting from normal surface-finishing processes. Interference between opposing asperities in sliding or rolling applications is a source of friction, and can lead to metal welding and scoring. Ideally, the lubricating film between two moving surfaces should be thicker than the combined height of the opposing asperities.


Lubricant additive that prevents sliding metal surfaces from seizing under conditions of extreme pressure. At the high local temperatures associated with metal-to-metal contact, an EP additive combines chemically with the metal to form a surface film that prevents the welding of opposing asperities, and the consequent scoring that is destructive to sliding surfaces under high loads. Reactive compounds of sulfur, chlorine, or phosphorus are used to form these inorganic films.


Property of a lubricant to form a film on the lubricated surface, which resists rupture under given load conditions. Expressed as maximum load the lubricated system can support without failure or excessive wear.

Related questions

MarineProHelp 2018 - 2021